Multifunctional Interface Strengthening Agent - Q1
.Surface modification: Improve the grafting ability of inorganic surfaces to organic matter and improve self-leveling adhesion.
.Good permeability: Based on the root system principle, the small molecule emulsion prepared by the reverse method has a strong penetration depth and effectively improves the foundation strength of the floor.
.High solid content: higher than other products on the market, with more active ingredients and more outstanding effects.
.Continuous enhancement: The induced crystallization accelerator continuously enhances the strength of the base layer, greatly reducing the risk of hollowing and cracking.
The four-in-one interface agent uses high-hardness emulsion as the basic carrier. It can be used on epoxy floors, on tile floors, for reinforcement of sandy floors, and as a general interface agent. The new generation of Q1 reinforced interface agent uses the reverse-phase method to prepare hard monomer composite emulsion. The emulsion has smaller particle size and better permeability. Increase the oxidation speed and the strength will come faster. The new formula adds aziridine cross-linking agent. Get physical properties comparable to water-based epoxy. After curing, it is not afraid of corrosion by organic solvents such as xylene and can be used for self-leveling primer. No cracks will be visible after mixing with water at a ratio of 1:1. The new formula adds a crystallization induction accelerator to sustainably and stably reinforce the base layer.
| Usage environment | Dilution ratio | Reference dosage | Effect |
| Tile floor | 1:3 | 400-600m2 | No sticking to feet, no peeling |
| Cement floor | 1:2 | 600-900m2 | No sanding required |
| Epoxy/polyurethane floor | Not diluted with water | 200-300m2 | Suitable for floors after epoxy penetration |
| Sandy floor | 1:0.5-1 | 40-80m2 | Improve surface strength |