Inorganic Transparent Primer
● Component: single component, water-based paint
Curing method: self drying at room temperature
Solid content: 16-18%
PH value: 11.0~12.0
● Water resistance: No abnormalities after 168 hours
Alkaline resistance: No abnormalities after 168 hours
Water permeability: ≤ 0.1ml
● Resistance to salt flooding and alkalinity: ≥ 120h
Adhesion: ≤ Level 0
Surface hardness: 2H-3H
Air permeability: ≥ 600 g/m2 · d
● Combustion performance: Advanced non combustible
● Excellent water resistance, alkali resistance, sealing and breath ability.
● Excellent natural moisture, mold, and sterilization effects.
● Good adhesion, no cracking, peeling, or foaming.
● Has excellent flame retardancy and resistance to salt alkalinity.
● Convenient construction and fast drying speed.
● Free of formaldehyde and VOC, clean taste, more environmentally friendly and safe the paint material has good stability during hot and cold storage, and has a long shelf life.
● Construction method: roller coating, brush coating, spray coating.
● Paint consumption: Theoretical value: 10-12m2/coat/kg The actual paint consumption may vary depending on the construction method, surface condition of the base layer, and construction environment.
● Coating preparation: It is not recommended to add water.
● Basic level requirements and treatment: The basic level is required to be dry, flat, clean, free from floating ash and oil stains.
● Construction requirements: Before applying the primer, the moisture content and pH value of the base material putty should be checked. The moisture content should be less than 10%, and the pH value should be less than 10 The primer should be evenly applied and the base layer should be sealed.
● Drying time: surface drying: less than 2 hours/25 ℃ (drying time varies with environmental temperature and humidity), repainting time: more than 6 hours/25 ℃
● Climatic conditions: The temperature of the environment and base layer should not be lower than 5 ℃, and the humidity should be lower than 85%, otherwise the expected coating effect cannot be achieved.
Store at 5-35 ℃ in a cool, clean, and dry place. The remaining paint should be sealed and covered to prevent impurities from causing the paint to deteriorate. If the product is unopened and properly stored, the shelf life is 2 years.