Concrete Hardener - NB101
.Solvent-free, high brightness, high penetration, high water resistance, sustainable reaction
.Ready to use after opening the barrel, easy to construct
.Improve the chemical resistance and wear resistance of concrete
.Reduce the water loss of newly poured concrete during the curing process
.Reduce dust on concrete floors
.Environmentally friendly and does not pollute the environment
Net weight | 20KG/barrel | ||
Storage conditions/Shelf life | The shelf life is 12 months in a dry environment between +5°C and +30°C when unopened. Protect from frost. | ||
Main ingredients | High magnesium mineral water, modified potassium silicate, modified sodium silicate aqueous solution, additives | ||
PH/value | 12 | ||
Reference dilution ratio | 1:4 | ||
Reference usage | 0.15-0.25kg/m2/layer | ||
Density | ~1.20kg/L | ||
Water retention performance | Water loss g/100cm2 | Compared to ASTM C309, Water loss 100%=5.5g/100cm3) | Compared to untreated concrete, Water loss (100%=18.7g/100cm3) |
10.92 | 10.92 | 58.4% | |
Wear resistance | Wear resistance is 35% higher than C25 concrete (Taber Abrader,H-22 wheel/1000g/1000 laps) |
Category |
Items |
Parameters |
Products data |
Exterior color |
Colorless transparent liquid |
Packaging specifications |
20kg/barrel or 1 ton/barrel | |
Technical data |
Ingredients |
High magnesium mineral water, potassium silicate, lithium hydroxide, additives, etc. |
Density |
1.20kg/L (under +20°C conditions) | |
Solid content |
~23% | |
Hardness |
Mohs hardness ~7 | |
Reference dilution ratio |
1:3or1:4 | |
Reference dosage |
0.15-0.25kg/m² | |
Applicable environment |
Outdoor flooring, sealed and solidified flooring, diamond sand flooring, ground stone flooring, and self leveling flooring | |
Storage conditions&Shelf life |
Original and sealed in a dry environment between +5°C and +30°C, shelf life is 12 months from date of production, protected from frost. | |
1. Mix NB101 Concrete Hardener with water at a ratio of 1:4 and stir evenly before use.
2. Clean the ground with a 50-mesh opening and splash or spray it on the ground. After spraying, use a mop or rake to drag it evenly and keep it moisturized for 30 minutes to 1 hour. After it is completely dry, start the dry grinding construction.
3. First polish with a 100-grit resin disc, clean it and then spray the NB101 Concrete Hardener a second time. After drying, polish it again with a 200-mesh resin disc.
4. If the requirement is higher, 200-800 mesh can be applied again.
5. This product may have slight precipitation after long-term storage, which is normal.