Detailed Steps For Stamp Concrete Paving

The construction steps of stamp pavement include the following steps:

Mixing: Use a mixer to mix ordinary concrete evenly.

Pouring: Concrete is laid on the roadbed and spread evenly.

Spreading reinforcement and lightening: After the concrete is initially set, spread the colored reinforcement evenly on the concrete. In about half an hour, the color of the reinforcement on the concrete surface will become darker. At this time, an iron plate can be used for large-area lightening. After the area is finished, the corners will be processed.

Sprinkle the release powder: Spread the colored release powder evenly on the surface of the reinforced material that has been polished. It does not need to be thick, just cover it with a thin layer, and cover all the areas that need to be stamp.

Place the texture mold: Use the selected texture mold and place it on the release powder in the designed direction. Because the concrete is only in the initial setting state at this time, the construction personnel can stand on the mold and press with their feet to copy the pattern to the ground. On the floor, the concave and convex textures of colored bricks or stones are engraved on the concrete surface.

Close the construction area: to avoid being accidentally trampled by irrelevant personnel and affecting the paving effect.

Follow the above steps to construct stamp pavement to obtain a beautiful and durable stamp pavement.

https://www.besdecorative.com/